大型煤电基地开发生态累积效应及定量分析方法研究

大型煤电基地(CEBs)是我国煤基能源和材料集中开发区域和国家能源战略安全重要支撑，合理评价CEBs开发生态影响是CEBs可持续协调开发、科学管理中的难点问题。研究将CEBs开发视为系统工程，与自然生态系统(NES)相关联，深入研究大型煤电基地生态系统(CEBES)的驱动行为、内在结构及主要关系、生态影响途径、生态累积过程和生态累积效应及阈值分析方法。基于CEBs空间和功能定位提出CEBs的概念、内涵和特点，融合构建的CEBES涵盖到自然资源、能源开发行为(煤、电等)、其他人类活动(农、牧、城)和大气、水、土壤及生物域；研究表明CEBES的生态累积状态受三种行为驱动和影响(自然行为、能源开发行为和其他人类活动),通过融合、传导和辐射耦合作用，表现为生态要素损伤、系统结构变化和系统状态失衡三级状态，生态累积具有影响多态性、空间多尺度和过程渐变性特点；明确了生态累积过程、累积效应和阈值及其相互关系，引入反映生态影响累积程度的生态损伤系数，提出四类生态阈值(生态要素、内部结构、系统状态和行为调控);基于系统性和实用性筛选反映生态累积相对状态的60项指标，构建具有“三力”驱动、分区要素耦合和系...     

Tungsten-based material as promising new lead-free gamma radiation shielding material in nuclear medicine

PurposeThe main objective of this study was to evaluate the efficacy of tungsten carbide as new lead-free radiation shielding material in nuclear medicine by evaluating the attenuation properties.Materials and methodsThe elemental composition of tungsten carbide was analysed using Field-Emission Scanning Electron Microscopy (FESEM) with energy dispersive X-ray (EDX). The purity of tungsten carbide was 99.9%, APS: 40–50 µm. Three discs of tungsten carbide was fabricated with thickness of 0.1 cm, 0.5 cm and 1.0 cm. Three lead discs with similar thickness were used to compare the attenuation properties with tungsten carbide discs. Energy calibration of gamma spectroscopy was performed by using ¹²³I, ¹³³Ba, ¹⁵²Eu, and ¹³⁷Cs. Gamma radiation from these sources were irradiated on both materials at energies ranging from 0.160 MeV to 0.779 MeV. The experimental attenuation coefficients of lead and tungsten carbide were compared with theoretical attenuation coefficients of both materials from NIST database. The half value layer and mean free path of both materials were also evaluated in this study.ResultsThis study found that the peaks obtained from gamma spectroscopy have linear relationship with all energies used in this study. The relative differences between the measured and theoretical mass attenuation coefficients are within 0.19–5.11% for both materials. Tungsten carbide has low half value layer and mean free path compared to lead for all thickness at different energies.ConclusionThis study shows that tungsten carbide has high potential to replace lead as new lead-free radiation shielding material in nuclear medicine.     

Evolutionary rescue by beneficial mutations in environments that change in space and time

A factor that may limit the ability of many populations to adapt to changing conditions is the rate at which beneficial mutations can become established. We study the probability that mutations become established in changing environments by extending the classic theory for branching processes. When environments change in time, under quite general conditions, the establishment probability is approximately twice the ‘effective selection coefficient’, whose value is an average that gives most weight to a mutant''s fitness in the generations immediately after it appears. When fitness varies along a gradient in a continuous habitat, increased dispersal generally decreases the chance a mutation establishes because mutations move out of areas where they are most adapted. When there is a patch of favourable habitat that moves in time, there is a maximum speed of movement above which mutations cannot become established, regardless of when and where they first appear. This critical speed limit, which is proportional to the mutation''s maximum selective advantage, represents an absolute constraint on the potential of locally adapted mutations to contribute to evolutionary rescue.     

Artificial Sweat for Humanoid Finger

To achieve favorable Frictional Tactile Sensation （FTS） for robot and humanoid fingers, this report investigated the effects of human finger sweat on Friction Coefficient （FC） and verified the effectiveness of artificial sweat on FTS tbr a humanoid finger. The results show that the model sweat （salt and urea water faked real sweat） increases the FC of the real finger sliding on the high hygroscopic and rough surface （paper）, whereas on the low hygroscopic and smooth surface （PMMA）, the sweat forms a fluid film and decreases FC, restricting severe finger adhesion. Further, the film formation and capillary adhesion force of sweat were discussed. The experimental results with the artificial sweats （ethanol and water） and humanoid finger （silicone rubber skin with tactile sensors） verifies the effectiveness. The artificial sweat restricts severe adhesion （stick-slip vibration）, and enhances cognitive capability of FTS.     

Citrus orchard evapotranspiration: Comparison between eddy covariance measurements and the FAO-56 approach estimates

Abstract

The aim of this study was to use the FAO-56 single and dual crop coefficient approaches to estimate actual evapotranspiration (ET_a) over an irrigated citrus orchard under drip and flood irrigations in Marrakech, Morocco. The results showed that, by using crop coefficients suggested in the FAO-56 paper, the performance of both approaches was poor for two irrigation treatments. The Root Mean Squared Error (RMSE) between measured and simulated ET_a values over the citrus orchard under drip irrigation was about 1.43 and 1.27 mm/day for the single and dual approaches, respectively, while the corresponding statistics for the orchard irrigated by the flooding technique was 1.87 and 2.48 mm/day. After determination of the appropriate values of the crop coefficient (K_c) based on eddy covariance measurements of ET_a, the performance of both approaches greatly improved. The obtained K_c values were lower than the FAO-56 values by about 20%. The low K_c values obtained reflect the practice of drip irrigation for one field and the low value of cover fraction for the other field. Additionally, the efficiency of the irrigation practices was investigated by comparing the measured K_c for two fields. The results showed that a considerable amount of water was lost by direct soil evaporation from the citrus orchard irrigated by flooding technique.     

Molecular modelling of the mass density of single proteins

Using molecular dynamics (MD) simulations, the density of single proteins and its temperature dependence was modelled starting from the experimentally determined protein structure and a generic, transferable force field, without the need of prior parameterization. Although all proteins consist of the same 20 amino acids, their density in aqueous solution varies up to 10% and the thermal expansion coefficient up to twofold. To model the protein density, systematic MD simulations were carried out for 10 proteins with a broad range of densities (1.32–1.43?g/cm³) and molecular weights (7–97?kDa). The simulated densities deviated by less than 1.4% from their experimental values that were available for four proteins. Further analyses of protein density showed that it can be essentially described as a consequence of amino acid composition. For five proteins, the density was simulated at different temperatures. The simulated thermal expansion coefficients ranged between 4.3 and 7.1?×?10^?4?K^?1 and were similar to the experimentally determined values of ribonuclease-A and lysozyme (deviations of 2.4 and 14.6%, respectively). Further analyses indicated that the thermal expansion coefficient is linked to the temperature dependence of atomic fluctuations: proteins with a high thermal expansion coefficient show a low increase in flexibility at increasing temperature. A low increase in atomic fluctuations with temperature has been previously described as a possible mechanism of thermostability. Thus, a high thermal expansion coefficient might contribute to protein thermostability.     

Evaluation of integrating topographic wetness index with backscattering coefficient of TerraSAR-X image for soil moisture estimation in a mountainous region

The estimation of soil moisture by using the backscattering coefficient of radar in a mountainous region is a challenging task due to the complex topography, which impacts the distribution of soil moisture and changes the backscattering coefficient. Complicated terrain can disturb empirical moisture estimation models, thereby, the resulting estimates of soil moisture are very unlikely reliable. This article proposed an innovative way of integration of the topographic wetness index (TWI) and the backscattering coefficient of soil obtained from the TerraSAR-X image, which improves the accuracy of measurement of the soil moisture. The standard estimation error and the coefficient of determination from the model were used to evaluate the performance of TWI. Our results show that the standard estimation error was decreased from: (1) 4.0% to 3.3% cm³ cm⁻³ at a depth of 5 cm and (2) 4.5% to 3.9% cm³ cm⁻³ at a depth of 10 cm. The most reliable estimation was observed at a depth of 5 cm, when it was compared with those of 0–5 cm, 10 cm and 15 cm. The TWI from the digital elevation model (DEM) is useful as a constraint condition for modeling work. This article concludes that the integration of the backscattering coefficient of soil with TWI can significantly reduce the uncertainty in the estimation of soil moisture in a mountainous region.     

Hill coefficient-based stochastic switch-like signal directly governs damage-recovery dynamics in freshwater fish in response to pulse copper

Growing evidence demonstrates that fluctuating metal stressors can have profound impact on the ecophysiological responses in aquatic species. However, how environmental stochasticity affects the complex damage-recovery dynamics in organisms remains difficult to predict. The objective of this paper was to investigate the stochastic behavior in the damage-recovery dynamics in tilapia in response to pulse waterborne copper (Cu). We developed a mathematical framework that allows discrimination between damage and recovery processes in tilapia exposed to designed pulse Cu scenarios. We built deterministic nonlinear models for the damage-recovery dynamics that produce response surfaces describing killing/recovery rate–Cu-pulse interval interactions. Here we showed that the stochastic switching behavior arose from competition among killing, recovery rates, and Cu pulse frequency. This competition resulted in an ultrasensitivity appeared in whole body, gills, muscle, liver, and kidney with Hill coefficients of ≥7, 4, 7, 5, and 5, respectively, at Cu 3 mg L⁻¹, dilution rate 0.05 h⁻¹, and pulse interval 72 h, indicating that a stochastic switch-like response was generated. We argue that the role of gill-associated Hill coefficient as a direct signal of the stochastic switch-like response in the damage-recovery dynamics in response to pulse metal stressor can serve as a sensitive indicator for risk detection in fluctuating environments. Our approach constitutes a general method to identify the stochastic switch-like response for aquatic species exposed to fluctuating metal stressors, which may help to predict and, eventually, expand our understanding of the damage-recovery dynamics. Finally, we implicate that Hill coefficient-based switch-like signal and its damage with hazard response can be linked in an information theoretic framework to handle environmental stochasticity.     

Assessing Methods for Developing Phosphorus Desorption Isotherms from Soils using Anion Exchange Membranes

Developing desorption isotherms for inorganic phosphorus (P) is a time-consuming and non-standardized procedure. Anion exchange membranes (AEMs) have been successfully used in studies of P desorption kinetics and total membrane-desorbable P, but rarely have they been used for developing P desorption isotherms. Our study had two objectives: (1) to evaluate the suitability of using multiple strips of AEMs (termed the Multiple AEM Method) to develop P desorption isotherms; and (2) to compare the Multiple AEM Method with a sequential-extraction approach using AEMs (termed the Sequential AEM Method) to determine if the manner in which AEMs were used would influence the slope of the desorption isotherm, i.e. the partition coefficient. Both methods yielded well-defined, but numerically different desorption isotherms for all levels of sorbed P. However, estimated K _d values among methods were equivalent in the low and medium levels of P sorbed. The Multiple AEM method was quicker than the Sequential AEM method, but both gave similar K _d values in an agriculturally significant range of soil solution concentrations. These methods should be tested on a range of soil type to determine their suitability in developing P desorption isotherms and to move toward method standardization for desorption isotherms.     

太湖典型草、藻型湖区紫外辐射的衰减及影响因素分析

2004年4月通过野外原位观测和实验室测定相结合的方法对东太湖和梅梁湾典型草、藻型湖区紫外辐射光谱衰减及影响因素进行了研究。结果表明,320nm(UV-B)、380nm(UV-A)的衰减系数在6.33~19.59m-1、3.41~13.64m-1间变化,对应的1%表面光强穿透深度分别为0.24~0.73m、0.35~1.35m,到达湖面的99%UV-B辐射在0.5m左右表层水就衰减完毕,东太湖和梅梁湾紫外辐射衰减系数存在明显的湖区差异;溶解性有机碳(DOC)的浓度在6.60~17.17mg/L间变化,其均值为(9.99±2.48)mg/L;375nm波长处CDOM吸收系数为1.78~6.25m-1,均值为(3.70±1.10)m-1;在短波部分CDOM吸收与DOC浓度存在显著性相关,相关性大致随波长降低而增加,320nm处的线性关系式:ad320=0.885DOC 2.182;紫外辐射衰减主要受制于水体中的CDOM浓度,衰减系数与DOC浓度、CDOM吸收系数存在显著性相关,340nm处的关系式分别为:Kd340=0.82 1.05DOC、Kd340=1.98 1.49ad340。在太湖紫外辐射衰减还要受悬浮物和叶绿素a浓度的影响,衰减系数与DOC、叶绿素a和悬浮物浓度多元回归的结果明显要高于单独与DOC浓度或CDOM吸收系数的回归结果。